Y-Blow Down Valve Model
226UT from United Brass
Class 200 (200 WSP @ 406° Max)
400 Water-Oil-Gas
PTFE TeflonŽ Disc, Integral Seat |
Y-Blow Down Valve Model 325U
from United Brass
300 Lb. Steam Pressure
600 Water-Oil-Gas
Seat & Disc 400-500 Brinnell Stainless Steel |
 |
|
United Brass is a ISO 9001 registered
manufacturer and the model 226UT complies
with MSS-SP-80-97.
This valve model has a PTFE TeflonŽ disc and is rated at 200
WSP
at 406° max. 100% pressure tested and threaded
connections make this valve
easy to install. |
The class 300 Y-Blow down
valve has threaded ends, swivel disc holder, rising stem,
and is 100% pressure tested. The seat & disc are made
of Brinnell stainless steel. |
|
NOTE from United Brass: Care must be taken in
blow down piping so that no water hammer effect causes shock
to the "Y" blow down valve, especially in cases where a
boiler has two blow down lines. In such cases, both
lines should be piped to a common set of blow down valves or
each blow off line should be piped separately to the blow
down separator. Excessive water hammer or shock can
destroy valves and piping and could cause serious injury. |
 |
|
United
Brass Class
200 Y-Blowdown Valve - Model 226UT |
|
Size |
1" |
1-1/4" |
1-1/2" |
2" |
|
A Dim. |
4.75 |
5.56 |
6.25 |
7.75 |
|
B Dim. |
5.75 |
7.00 |
7.75 |
8.75 |
|
Ship Weight |
4.20 |
6.10 |
9.00 |
15.00 |
|
Price |
$206.90 |
$257.30 |
$335.60 |
$479.86 |
|
|
United
Brass Class
300 Y-Blowdown Valve - Model 325U |
|
Size |
1" |
1-1/4" |
1-1/2" |
2" |
|
A Dim. |
4.75 |
5.56 |
6.25 |
7.75 |
|
B Dim. |
5.75 |
7.00 |
7.75 |
8.75 |
|
Ship Weight |
4.75 |
6.25 |
8.60 |
15.11 |
|
Price |
$337.34 |
$443.98 |
$473.30 |
$760.50 |
 |
